VueGuard® 912 anti-weathering water clear hardcoat is available for plastic sheets and molded articles, offering superior resistance to ultraviolet degradation and abrasion. While Vueguard 912® has been designed primarily for acrylic (polymethylmethacrylate) substrates, other plastics may benefit from its application.
VueGuard® 912 Anti-Weathering Water Clear Hardcoat Technical Data
Environmental Exposure
| Unexposed | Humidity (1) | Weathering (2) | |
| Light Transmittance (%) (3) | 91 | 91 | – |
| Haze (%) (4) | 0.2 | 0.4 | 4-5 |
| Adhesion (%) (5) | 100 | 100 | 100 |
| Yellowness Index Change (6) | 0 | 0 | 2-3 |
1. Humidity: 120 hours @ 52°C and 100% RH (ASTM D-2247)
2. Weathering: ASTM G-53 (cycle of 8 hrs UV @ 70°C and 4 hrs condensing Humidity @ 50°C for 2,000 hrs using Q-Panel QUV test
equipment)
3. Light Transmittance: ASTM D-1003
4. Haze: ASTM D-1003
5. Adhesion: ASTM D-3359
6. Yellowness Index: ASTM D-1925
Scratch/Abrasion Tests
| Haze Change (4) | ||
| Uncoated | Coated | |
| Steel-Wool Scratch (7) | 31.1 | 0.4 |
| Taber Abrasion (8) 100 Cycles | 26.2 | 3-4 |
7. Steel-Wool Scratch: Steel-wool rotary test representing severe scratching using a 1.25-square-inch #0000 steel-wool pad at 24 psi
for 100 rotations
8. Taber Abrasion: ASTM D-1044 (CS10F wheels with 500g load)
Chemical Resistance (9), (10)
| Uncoated | Coated | |
| Toluene | X | S-M |
| Acetone | X | S |
| Trichloroethylene | X | S-M |
9. Chemical Resistance: Similar to ASTM D-1308 but more severe. Evaporation minimized) through continuous contact with chemical
by means of a pad in the mouth of an inverted bottle placed on the specimen.
10. L—Long-term contact, greater than 24 hours
M—Medium-term contact, up to 8 hours
S—Short Term contact, up to 1 hour
X—Immediate attack: do not use
PCI Labs assumes no obligation or liability for any information furnished by it or results obtained with respect to these products. All such advice is given and accepted at the buyer’s risk. Users should be governed by their own tests, made under conditions representative of those to which the product will be subjected in actual service. Users assume all risks and responsibilities associated with the proper handling, use and disposal of the material.
PDF Download